MCT100
Coating Thickness Gauge
HIGH-PRECISION COATING THICKNESS GAUGE MAKING MEASUREMENT EASIER!
This coating thickness gauge is a combined magnetic and eddy current device that automatically identifies magnetic or non-magnetic substrates and automatically switches between them. It can quickly, non-destructively, and precisely measure the thickness of coatings and plating.
This coating thickness gauge features backlighting, LCD dot-matrix display, single-point and multi-point calibration, and is resistant to high and low temperatures, impact-resistant, and the probe is wear-resistant (over 500,000 times), ensuring stable test results.
It offers fast testing speed and is applicable to various measurement environments. Its technical parameters fully comply with national and international standards.
- Measurement Methods: F Magnetic Induction, N Eddy Current.
- Spring guide sleeve probe with ultra-wear-resistant hard alloy probe tip ensuring a constant pressing force.
- Stable sampling value on hard or rough surfaces.
- Can quickly and automatically identify magnetic and non-magnetic substrates.
- Offers high accuracy with stable results, capable of measuring ultra-thin coatings from 1 to 5 μm.
- Measurement speeds up to 0.3s/time.
- Automatically power off.
- Dot matrix backlight display, free from parallax, suitable for use at night.
- Light weight and easy to carry.
Fe Function
Can detect the thickness of non-magnetic coatings on all magnetic substrates:
- Paint, Powder Coatings, Plastics, Ceramics, Chromium, Copper, Zinc, applied on Steel or Iron etc.
NFe Function
Can detect the thickness of insulating coatings on all non-magnetic substrates:
Paint, Plastics and Ceramics. These coatings must be applied on non-magnetic metal substrates such as Aluminum, Copper, Brass, or Stainless steel.
- Measurement Range: 0-1500 μm
- Optional measurement range: 0-3000μm, 0-5000μm
- Resolution: 0.1μm (099.9μm), 1μm (100~1500μm)
- Measurement Accuracy: ±2%H+1μm, (where H represents the coating thickness)
- Thinnest Substrate: 0.3mm
- Minimum Curvature: Convex 5mm / Concave 25mm
- Power Supply: 2 pcs. 1.5v (AAA batteries)
- Operating Conditions: Temperature -10 ~ 50°C, Humidity: 10 ~ 85% RH
- Unit conversion: μm/mil
- Measurement mode: Single/Continuous
- Display: LCD dot-matrix screen
- Applicable Areas: Non-magnetic coatings on magnetic substrates/ Insulating coatings on non-magnetic substrates
- Dimensions: 101×61×26mm
- Weight: Approximately 54g (excluding batteries)
Automotive Industry
Metal Manufacturing
Chemical Industry
Quality Inspection
